Sensor: lis2dh

Overview

This sample application demonstrates how to read accelerometer data from a LIS2DH sensor using the Zephyr driver. It is also compatible with the LIS2DH12 and LIS3DH sensors.

The application periodically reads the sensor’s X, Y, and Z axis values every 2 seconds and prints the data to the console.

Requirements

Atmosic EVK <board | serial>

Building and Running

This sample can be found under openair/samples/sensor/lis2dh.

Build command:

west build -p always -b <BOARD>//ns openair/samples/sensor/lis2dh --sysbuild -T samples.sensor.lis2dh.atm

Flash command:

west flash --skip-rebuild --device <DEVICE_ID> --jlink --fast_load [--erase_flash]

References

For more detailed information on the LIS2DH sensor and its driver, refer to the official Zephyr Project documentation:

LIS2DH Motion Sensor.