Application Notes
SUMMARY: This application note describes the configurations, key matrix matching with keyboard driver, and virtual key settings in HID_remote and HID_keyboard examples for ATM2/3, ATM33/e, and ATM34/e SoC series.
Read MoreSUMMARY: This application note describes the settings, functionality, and code flow of the (Atmosic Sensor Hub) ATM_shub example code running on an Atmosic ATM2, ATM3, or ATM33/e Wireless SoC.
Read MoreSUMMARY: This document details the different versions of ATM2/ATM3 Evaluation Kit hardware, describing the specific changes implemented in each version of the Evaluation Board, Interface Board, and RF Source Transmitter.
Read MoreRelease Date: September 30, 2021 Document Number: ATM32x1-ANEHM-0054
Read MoreSummary: The Non Volatile Data Storage (NVDS) over UART feature, also referred to as “Flash over UART”, is mainly for Atmosic CSP package or RAM based applications. This is used when the Atmosic device is connected to an external MCU through a UART interface and the flash storage is on the external MCU side.
Read MoreSummary: This application note describes the settings, functionality, and code flow of the BLE_att_client example code running on an Atmosic-based Bluetooth LE system.
Read MoreSUMMARY: This document describes how to control the Atmosic Evaluation Kit (ATM2/ATM3 5×5 mm package or 6×6 mm package) using the AT commands.
Read MoreSummary: BLE_adv is a flash based application demonstrating Bluetooth Low Energy advertiser capability. This application note offers a set of preconfigured beacon examples as well as allows customization of beacon configuration parameters and payload.
Read MoreSummary: This application note describes the system, software architecture, configurations and state transitions of the Wakeup Receiver (WURX) examples running on Atmosic M2/M3 platforms.
Read MoreSummary: This application note describes the settings, functionality, and code flow of the BLE_att_server example code running on an Atmosic-based Bluetooth LE system.
Read More